Polypropylene (PP), also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. It is produced via chain-growth polymerization from the monomer propylene. Polypropylene belongs to the group of polyolefins and is partially crystalline and non-polar. Its properties are similar to polyethylene, but it is slightly harder and more heat resistant. It is mechanically rugged material and has a high chemical resistance. The density of (PP) is between 0.895 and 0.92 g/cm3. Therefore, PP is the commodity plastic with the lowest density. With lower density, moldings parts with lower weight and more parts of a certain mass of plastic can be produced. Unlike polyethylene, crystalline and amorphous regions differ only slightly in their density. However, the density of polyethylene can significantly change with fillers. The Young's modulus of PP is between 1300 and 1800 N/mm².
Isotactic Polypropylene Raffia grade, primarily made from woven sacks and jumbo bags, suitable for bitumen water proofing membranes application, MFR 7-10 g/10min-2.16kg @230˚C.
Polypropylene Homo Polymer resins primarily made from industrial waste, with transparent color, suitable for injection applications, MFR 16.0-21.0 g/10min-2.16kg @230˚C.
Polypropylene Homo Polymer resins primarily made from consumer and industrial waste, with white color, suitable for injection applications, MFR 12.0-18.0 g/10min-2.16kg @230˚C.
Polypropylene Homo Polymer resins primarily made from consumer and industrial waste, with blue, red, green and extra colors, suitable for extrusion mats and injection applications, MFR 14.0-18.0 g/10min-2.16kg @230˚C.
Polypropylene Co-Polymer resins primarily made from buttery and industrial waste, with black color, suitable for injection applications, MFR 10.0-12.0 g/10min-2.16kg @230˚C.
We can provide our materials with different type of packaging, woven bags, or jumbo bags, according to our customer requirements.